Step 1: Selection of raw materials

Industrial aluminum profile is a kind of industrial framework obtained by heating through aluminum rods to be squeezed by mold, and aluminum rods are made of aluminum ingot by melting, which is called industrial aluminum profile raw materials; raw materials will directly affect the industry Performance of aluminum profile products.

Step 2: Aluminum rod heating

The heating treatment of aluminum rods should ensure the control of temperature. If the temperature is too high or the temperature is too low, the hardness of the finished product will be directly affected, so the temperature must be strictly controlled during the heating and cooling process;

Step 3: mold design

Industrial aluminum profile is an end product that is squeezed by the aluminum rod through the heating, while the mold is a high -precision specifications designed according to the needs to squeeze the specifications and section of the profile products;

Step 4: Industrial aluminum profile squeeze

For squeezing production, the squeezing temperature is a basic and critical process factors. During the squeezing process, we must carefully control the squeezing speed.

Step 5: Industrial aluminum profile direct correction

The straightness of aluminum profiles affects whether aluminum profiles can be used on mechanical equipment, so the straight line of aluminum profiles is one of the important criteria for the quality of aluminum profiles. Generally, the squeezed profiles need to be straight -line.

Step 6: Artificial timing

The aluminum profile produced by squeezing is low, and the hardness before the time limit is low, and it cannot be used as a finished product. Therefore, generally speaking, the time -effectiveness must be improved to improve the intensity.

Step 7: Sand spraying

After the industrial aluminum profile is squeezed, the surface will have obvious stretching patterns, and the surface micropores will be large and relatively rough.

Step 8: Surface oxidation treatment

The surface of the aluminum profile is treated with anode silver oxide, which is elegant and anti -corrosion. Generally, after cooling, the finished aluminum profiles come out.

Step 9: Packaging

Because the quality requirements of industrial aluminum profile products are very high and the overall aesthetics of the appearance is very particular, the requirements in the later packaging are very strict.

Finished aluminum profile processing process

Step 1: Cut

The length of aluminum profile is 6.01 meters, and the aluminum profile is required according to the drawings. Our general cutting error is 0.5mm. In addition to cutting length, aluminum profiles can also be performed with angular cutting and diagonal cutting.

Step 2: Diamond to attack teeth

When aluminum profiles are generally connected, they need to be perforated and attacking teeth. Drill -knife knives used for aluminum profiles of different specifications are different. Therefore, punching and attacking teeth are also one of the aspects of testing the processing strength of an aluminum profile.

Step 3: Aluminum profile fixed

After cutting and drilling, the aluminum profile is required to connect the aluminum profile. As long as the installation master is installed according to the drawings, he can make the aluminum profile framework, equipment cover, assembly line workbench, etc.