Construction requirements for powder coating of aluminum profiles

Aluminum profile Powder coating surface treatment is the powder coating is sprayed to the surface of the aluminum profile with powder coating equipment (electrostatic spray machine), under static action, the powder will be evenly adsorbed to the surface of the aluminum profile, forming a powder like coating. The powder coating is cured by high temperature baking leveling to become the final coating with different effects (different types of effects of powder coating).

1.In order to give full play to the special properties of powder coating and extend the life of coating film, aluminum profile surface is first strictly pre-surface treatment.

2. When spraying, the aluminum profile must be completely grounded to increase the spraying efficiency of the powder coating

3. For coatings with large surface defects, the conductive putty should be scraped to ensure the smoothness and smoothness of the coating film

4. Aluminum profiles after powder coated need to be heated curing, curing conditions to powder product technical indicators, but must fully guarantee its curing temperature and time, to avoid lack of curing caused by quality accidents.

5. Inspect the aluminum profile immediately after coating.

6. Recycled powder must be screened to remove debris, according to a certain proportion of the new powder mixing effect.

7.Powder supply barrels, powder rooms and recycling systems should avoid the contamination of other different color powders, so every time the color change must be blown clean.